User Manual
Table Of Contents
- 1 .Safety information
- 2. IP Camera Tester Introduction
- 3. Operation
- 3.1 Installing the Battery
- 3.2 Instrument connection
- 3.2.1 IP camera connection
- 3.2.2 Analog camera connection
- 3.3 OSD menu
- 3.3.1 Lite mode
- 3.3.2 Drop-down Menu
- 3.3.3 Screen capture
- 3.3.4 TesterPlay
- 3.3.5 Rapid video
- 3.3.6 IP discovery
- 3.3.7 Rapid ONVIF test
- 3.3.8 IP camera test
- 3.3.9 Video monitor test
- 3.3.10 CVI camera test
- 3.3.11 TVI camera test
- 3.3.12 AHD camera test
- 3.3.13 Network tool
- (1)IP address scan
- (2)PING Test
- (3)Network test (Ethernet bandwidth test)
- (4)Port Flashing
- (5)DHCP server
- (6)Trace route
- (7)Link monitor
- 3.3.14 Rapid IP Discovery
- 3.3.15 PoE power / DC12V 3A power output
- 3.3.16 Audio Record
- 3.3.17 Data monitor
- 3.3.18 Audio player
- 3.3.19 Media Player
- 3.3.20 RTSP Player
- 3.3.21 Hik test tool
- 3.3.22 Dahua test tool
- 3.3.23 Update
- 3.3.24 Office
- 3.3.25 LED Flashlight
- 3.3.26 Browser
- 3.3.27 Notepad:
- 3.3.28 System Setting
- 3.3.29 File explorer
- 3.3.30 Theme
- 3. 4 Audio test
- 3.5 PoE power output
- 3.6 DC12V 3A power output
- 4. Specifications
Page.41.
screen to make the image display in full screen.
The tester supports resolution as follows:
1280x720P 25FPS / 1280x720P 30FPS / 1920x1080P 25FPS / 1920x1080P 30FPS/2048x1536P
18FPS/2048x1536P 25FPS/2048x1536P 30FPS /2560x1440P 15 FPS/2560x1440P 25 FPS/ 2560x1440P
30 FPS/2592x1944P 12.5FPS/2592x1944P 20FPS
(1) Coaxial PTZ control
UTC control: select “PTZ control or PTZ control-2” (AHD camera has two different order, if “PTZ
control” cannot be selected, use “PTZ control-2” )
To control the AHD camera with the coaxial PTZ, no other parameters setting are needed.