User Manual
Table Of Contents
- 1 .Safety information
- 2. IP Camera Tester Introduction
- 3. Operation
- 3.1 Installing the Battery
- 3.2 Instrument connection
- 3.2.1 IP camera connection
- 3.2.2 Analog camera connection
- 3.3 OSD menu
- 3.3.1 Lite mode
- 3.3.2 Drop-down Menu
- 3.3.3 Screen capture
- 3.3.4 TesterPlay
- 3.3.5 Rapid video
- 3.3.6 IP discovery
- 3.3.7 Rapid ONVIF test
- 3.3.8 IP camera test
- 3.3.9 Video monitor test
- 3.3.10 CVI camera test
- 3.3.11 TVI camera test
- 3.3.12 AHD camera test
- 3.3.13 Network tool
- (1)IP address scan
- (2)PING Test
- (3)Network test (Ethernet bandwidth test)
- (4)Port Flashing
- (5)DHCP server
- (6)Trace route
- (7)Link monitor
- 3.3.14 Rapid IP Discovery
- 3.3.15 PoE power / DC12V 3A power output
- 3.3.16 Audio Record
- 3.3.17 Data monitor
- 3.3.18 Audio player
- 3.3.19 Media Player
- 3.3.20 RTSP Player
- 3.3.21 Hik test tool
- 3.3.22 Dahua test tool
- 3.3.23 Update
- 3.3.24 Office
- 3.3.25 LED Flashlight
- 3.3.26 Browser
- 3.3.27 Notepad:
- 3.3.28 System Setting
- 3.3.29 File explorer
- 3.3.30 Theme
- 3. 4 Audio test
- 3.5 PoE power output
- 3.6 DC12V 3A power output
- 4. Specifications
Page.56.
Select the camera on the online detection menu, if the camera supports non-verification login, you
can click “play” directly, and view the image.
Pop up stream menu, select mainstream or second stream to test
If the camera does not support non-verification login, please select “camera” on the online detection
menu, and input correct user name and password, then click “log in”. After logging in, you can test it.
Play: select mainstream or seconded stream, IP camera live video display
Modify network information: modify camera parameter, such as IP address, subnet mask, gateway
etc.(Password needs to entered for camera web page login)