User Manual

Page.37.
Stream code: When test camera via RTSP, you can select mainstream or sub stream to test (if camera’s
RTSP have not been start or without, it will tip “auto match” fail, please witch to manually selecting.
IP Camera's IP: Enter the IP camera’s IP address manually or click “Search” to auto-scan for the IP
camera’s IP address. It is better to directly connect the IP camera to the tester so the
search results will only display the camera’s IP address. If the tester is connected to a
PoE switch, it will find and display several IP address.
IPC User Name: Enter IP camera’s user name.