User Manual

Page.56.
The PTZ address in the tester must be consistent with the dome camera or decoder, then the IPC
tester can test .After setting the parameter, the tester can control the PTZ and lens.
To control PTZ by screen touch:
Tap left, right, upward and downward on the touch screen to control the PTZ rotation direction, PTZ
cameras will rotate accordingly. By two fingers move outward and inward on the touch screen to zoom
in and out the PTZ.
To control PTZ by key buttons
Press the key control the PTZ direction of rotation
Press the key or , to switch on or turn off the aperture
Press the key or , adjust the focus manually
Press the key or , manually adjust the zoom