User Manual
Wizard & Main Interface
NVR User Manual
22
⑥ Record Settings. Two record modes are available: auto and manual.
Auto: Select one auto mode in the interface as shown below and then click “Next” button to
save the settings. Click “Advanced” to self-define record mode. See 7.1.1 Mode Configuration
for details.
Manual: Set the “Sensor Record”, “Motion Record” and “Schedule Record” of each camera.
Click “OK” to save the settings. See 7.1.1 Mode Configuration for details.
⑦ QRCode. Enable the NAT function in the interface or set it in the network configuration
after exiting the wizard (please refer to 11.1.7 NAT Configuration for details). You can scan the
QRCode through mobile client which is installed in the mobile phone or PAD to log in the
mobile client instantly. Please refer to 12.1 Mobile Client Surveillance for details. Click“OK”
to save the settings.