User Manual

Camera Management

NVR User Manual

Note: Only the local NVR has unoccupied channels, may the IPC of other NVR/DVR in the

same local network be added. And the added IPC supports previewing and recording.

4.1.2 Edit Camera

Click “Edit Camera” in the setup panel to go to the interface as shown below. Click to

view the live image of the camera in the popup window. Click to edit the camera (see

Add camera in 3.1 Startup Wizard for details). Click to delete the camera. Click in

the “Operation” header line and then click “Modify IPC Password” to pop up a window(check

the IPCs in the window, set the new password and then click “OK” button; only the online

IPCs’ passwords can be modified and a batch of IPCs’ passwords can be modified at the same

time). Click to upgrade an online IPC ( or click in the “Upgrade” header line and

then click “IPC Batch Upgrade” to upgrade a batch of IPCs), select the device which stores the

upgrade file in the “Device Name” item of the popup window and the upgrade file in the

list(you should select the upgrade IPC model in the window if a batch of IPCs’ passwords need

to be modified) and then click “Upgrade” button to start upgrading(the IPC will restart

automatically after the upgrade is completed successfully).

Note: