User Manual

Live Preview Introduction

NVR User Manual

 Add Display Mode

Method One:

① Click “Customize Display Modes” in the above interface and then set the screen mode.

② Add the cameras and adjust the cameras’ display sequence as required.

③ Click “Save” button under the display mode list and then enter the display mode name in

the popup window, click “OK” button to save the current display mode.

Method Two:

① Click StartSettingsSystemBasicOutput Settings to go to the interface and then

set the screen mode.

② Double click the camera or camera group in the list to add them to the selected window.

③ Click to save the current display mode (refer to 5.2.4 Scheme View In Sequence for

detail configurations). The display mode will be saved and displayed in the display mode list in

the live preview interface.

 Edit Display Mode

Click “Customize Display Modes” tab in the live preview interface and then select one display

mode in the list. Click “Rename” to edit the display mode name; click “Delete” to delete the

display mode.

 Corridor Pattern

Some models may not support this function.

Select corridor pattern in display mode. You can change the direction of the video image by

using this function. Please refer to User Manual of relevant camera.