User Manual

Introduction
NVR User Manual
3
 Support record to be backed up through USB (U disk, mobile HDD) or e-SATA interface
 Support record to be backed up by time/event/image searching
 Support record cutting for backing up when playing back
 Support a maximum of 10 backup tasks in background and backup status viewing
Alarm Management
 Support alarm schedule setting
 Support enabling or disabling of the motion detection, external sensor alarm input,
intelligence alarm and exception alarms including IP address conflict alarm, disk IO error
alarm, disk full alarm, no disk alarm, illegal access alarm, network disconnection alarm, IPC
offline alarm and so on, alarm trigger configuration supportable
 Support IPC offline alarm trigger configuration of PTZ, snap, pop-up video, etc.
 Support event notification modes of alarm-out, pop-up video, pop-up message box, buzzer,
e-mail and so on
 The snapped images can be attached into the e-mail when alarm linkage is triggered
 Support alarm status view of alarm-in, alarm-out, motion detection and exception alarm
 Support alarm to be triggered and cleared manually
 Support system auto reboot when exception happens
Network Functions
 Support TCP/IP and PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP protocol and so on
 Support allow and block list function and the allow and block IP address/IP segment/MAC
address can be set
 Support multiple browsers including IE8/9/10/11, Firefox, Opera, Chrome (available only
for the versions lower than 45) and Safari in MAC system
 Support remote achievement, configuration, import and export of the NVR parameters and
other system maintenance operations including remote upgrading and system restart
 Support remote camera configuration of the NVR including video parameters, image
quality and so on
 Support remote searching, playback and backup of the NVR
 Support manual alarm to be triggered and cleared remotely
 The auto-focusing camera can be adjusted through web client (support zoom in/out, but
one key focus is not currently supported)
 Support NVMS or other platform management software to access the NVR and manage it
 Support NAT function and QRCode scanning by mobile phone and PAD
 Support mobile surveillance by phones or PADs with iOS or Android OS
 Support NVR to be accessed remotely through telnet and the telnet function can be
enabled or disabled
 If one camera recording is enabled or disabled manually through web client, it will be
simultaneously enabled or disabled in the NVR
Other Functions
 The NVR can be controlled and operated by the buttons on the front panel, the remote
controller and the mouse
 Setting interfaces can be switched to one another conveniently by clicking the main menus