User Manual

Alarm Management

NVR User Manual

sensor alarm (see 9.1 Sensor Alarm for details).

③ Click “Apply” to save the settings. You can click “Regional Invasion Config” to go to the

intrusion detection configuration interface.

9.4 Exception Alarm

9.4.1 IPC Offline Settings

① Click StartSettingsAlarmExceptionIPC Offline Settings to go to the interface as

shown below.

② Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”,

“Pop-up Message Box” and “E-mail”. The IPC Offline Settings are similar to that of the sensor

alarm (see 9.1 Sensor Alarm for details).

③ Click “Apply” to save the settings.

9.4.2 Exception Handling Settings

① Click StartSettingsAlarmExceptionException Handling Settings to go to the

interface as shown below.

② Enable or disable “Push”, “Alarm-out”, “Buzzer”, “Pop-up Message Box” and “E-mail”.

The exception handling settings are similar to that of the sensor alarm (see 9.1 Sensor Alarm

for details).

③ Click “Apply” to save the settings.