User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 Wizard & Main Interface
- 4 Camera Management
- 5 Live Preview Introduction
- 6 PTZ
- 7 Record & Disk Management
- 8 Playback & Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Compatible Device List
Live Preview Introduction
DVR User Manual
34
5.3.4 Image Adjustment
Go to live preview interface and then click button on the tool bar under the camera
window to go to the image adjustment interface.
Image Adjustment
Select the camera and then click “Image Adjustment” to go to image adjustment tab. Refer to
the above picture. Drag the slider to set the camera’s brightness, contrast, saturation and hue
value. Check sharpen, wide dynamic and denoise and then drag the slider to set the value. Click
“Default” button to set these parameters to default values.
The introductions of these parameters are as follows:
Parameter
Meaning
Brightness
It is the brightness level of the camera’s image.
Contrast
It is the color difference between the brightest and darkest parts.
Saturation
It is the degree of color purity. The color is purer, the image is brighter.
Hue
It relates to the total color degree of the image.
Sharpen
It relates to the resolution level of the image plane and the sharpness level of the
image edge.
Wide Dynamic
The wide dynamic range (WDR) function helps the camera provide clear images
even under back light circumstances. When there are both very bright and very
dark areas simultaneously in the field of view, WDR balances the brightness level
of the whole image and provide clear images with details.
Denoise
Adopt the noise reduction technology to decrease the noise and make the image
more thorough. Increasing the value will make the noise reduction effect better but
it will reduce the image resolution.