User Manual

Device Management

NVR User Manual

11.2.2 Date and Time Configuration

Click StartSettingsSystemBasicDate and Time to go to the interface as shown below.

Set the system time, date format, time format and time zone of the NVR. The default time zone

is GMT+08 Beijing, Hong Kong, Shanghai, Taipei. If the selected time zone includes DST, the

DST of the time zone will be checked by default. Click “Apply” to save the settings.

You can manually set the system time or synchronize system time with network through NTP.

Manual: select “Manual” in the “Synchronous” option and then click after the “System

Time” option to set the system time.

NTP: select “NTP” in the “Synchronous” option and then input the NTP server.