User Manual

Record & Disk Management

NVR User Manual

7.4.5 Intelligence Recording

① Set the intelligence recording schedule of each IP camera. See 7.3 Schedule Setting for

details.

② Enable the intelligence detection (object detection, exception, line crossing or intrusion

detection) and draw alert surface or warning area of each IP camera. See 9.3 Intelligence

Alarm for details.

The camera will start intelligence recording once you finish the above settings. This function

is only available for some IPCs.

7.5 Disk Management

Click StartSettingsDiskDisk Management to go to disk management interface. You can

view the NVR’s disk number and disk status and so on in the interface. Click “Formatting”

button to format the HDD.

7.5.1 Storage Mode Configuration

Click StartSettingsDiskStorage Mode to go to the interface as shown below.

Note: 1. The new HDD should be formatted for normal use.

2. For normal use of the HDD which has been used in other NVR, if the NVR is of the same

model with the new NVR, please import the configuration file of the NVR to the new NVR or

format the HDD; if the models of the two NVRs are different, please format the HDD.