User Manual
Alarm Management
NVR User Manual
75
② Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”
and “E-mail”. The alarm handling setting of exception detection alarm is similar to that of the
sensor alarm (see 9.1 Sensor Alarm for details).
③ Click “Apply” to save the settings. You can click “Exception Config” to go to the
exception detection configuration interface.
9.3.3 Tripwire
Line Crossing Configuration:
The relevant alarms will be triggered if someone or something crosses the alert line drew by the
users.
① Click StartSettingsCameraIntelligent DetectionTripwire to go to the following
interface.
② Select the camera, enable the tripwire detection and set the duration.