User Manual
Alarm Management
NVR User Manual
77
Check “Draw area” and then click around the area where you want to set as the warning area in
the image (the warning area should be a closed area). Uncheck the “Draw area” if you finish
the drawing. Click “Clear” button to delete the warning area.
⑤ Click “Apply” to save the settings.
⑥ Click “Processing Mode” to go to the alarm handling configuration interface of intrusion
detection.
Intrusion Detection Alarm Handling Configuration:
① Click StartSettingsAlarmIntelligence AlarmIntrusion to go to the following
interface.
② Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”
and “E-mail”. The alarm handling setting of intrusion detection alarm is similar to that of the