User Manual

Device Management
NVR User Manual
95
⑤ Click StartSettingsNetworkDDNS to go to DDNS setting interface. Enable DDNS
and then select the www.dvrdydns.com DDNS type. Input the registered username, password
and domain name and then click “Apply”.
⑥ Map the IP address and HTTP port in the router (you can skip this step if UPnP function is
enabled).
⑦ Input the registered domain name plus HTTP port like http://www.xxx.dvrdydns.com:81
in the IE address bar and then press Enter key to go to the IE client.
11.1.5 E-mail Configuration
Click StartSettingsNetworkE-mail to go to the following interface. Input the sender’s
name, e-mail address, SMTP server and SMTP port (you can click “Default” to reset the SMTP
port to the default value) and then enable or disable the SSL and attaching image. Select the
username (the username list will be updated automatically according to the email address you
input) and input the password of the sender and then click “Apply” to save the settings (you
don’t have to input the username and password if “Anonymous Login” is enabled). Click
“Test” to pop up a window. Input the e-mail address of the recipient in the window and then
click “OK” button. The e-mail address of the sender will send an e-mail to the recipient. If the
e-mail is sent successfully, it indicates that the e-mail address of the sender is configured
correctly.