User Manual
Wizard & Main Interface 
  NVR  User  Manual 
16 
②  Date and Time Configuration. The date and time of the system need to be set up if you 
use the wizard for the first time. Refer to the following figure. Set the time zone, system time, 
date format and  time format. The DST will be enabled by default  if the time zone selected 
includes DST. Click “Next” to continue. 
③  Network  Settings.  Check  “Obtain  an  IP  address  automatically”  and  “Obtain  DNS 
automatically” to get the IP address and DNS automatically (the DHCP function of the router 
in the same LAN should also be enabled), or manually input them. Input the HTTP port, RTSP 
port  and  Server  port  (please  see  11.1.2  Port  Configuration  for  details).  Click  “Next”  to 
continue.     










