User Manual

PTZ

NVR User Manual

 Add preset

Select camera and then click “Add” button to add preset; or click in the camera list on

the right side of the interface to display the preset information of the dome and then click

to add preset. The operations of the “Add Preset” window are similar to that of the

PTZ control interface; please see 6.1 PTZ Control Interface Introduction for details.

 Edit preset

Select camera and preset. You can input the new name of the preset and then click to

save the new preset name. Adjust the rotating speed, position, zoom, focus and iris of the preset

and then click “Save Position” to save the preset.

 Delete Preset

Select camera and preset and then click “Delete” to delete the preset.

6.3 Cruise Setting

Click StartSettingsCameraPTZCruise to go to the interface as shown below.