User Manual

Record & Disk Management

NVR User Manual

There are all four disk groups. By using disk group, you can correspond the camera to disk (the

record data of the camera in the group will be stored into the disks in the same group). The

NVR with e-SATA interface supports e-SATA recording.

The added disks and cameras will be added into group one automatically. The disks and

cameras in the groups can be deleted except group one (select a disk group and then click

on the top right corner of the added disk or camera to delete it from the group). The deleted

disks and cameras will be moved into group one automatically.

Each group can add the disks and cameras from other groups. Each disk and camera can only

be added into one group. Select a disk group and then click in the disk or camera

row to pop up a window. Check the disks or cameras in the window and then click “Add”.

7.5.2 View Disk and S.M.A.R.T. Information

Click StartSettingsDiskView Disk Information to view the HDD information; click

“S.M.A.R.T. Information” to view the working status of the HDD. Refer to the picture below.