User Manual

Playback & Backup

NVR User Manual

8.3 Record Search, Playback & Backup

The record data and the snapped pictures can be backed up through network, USB (U disk or

USB mobile HDD) or e-SATA (only available for some models). The file system of the backup

devices should be FAT32 format.

8.3.1 Search, Playback & Backup by Time-sliced Image

① Click StartSearch and BackupBy Time-sliced Image to go to “By Time-sliced Image”

tab. There are two view modes: by time and by camera. In the time view mode, a maximum of

64 camera thumbnails can be showed. If the camera thumbnail number is more than 64, the

cameras will be listed directly by their camera name, not the thumbnail. A maximum of 196

camera names can be listed. If the camera name number is more than 196, the time view mode

will be disabled and the camera view mode will be available only.

② Select one camera in the interface and then click “Open” button.

③ Click the image box to play the record in the small playback box on the left side of the

interface (the box which has image inside indicates that the record data exist).

④ Refer to the picture below. Drag the color blocks on the time scale to select the record data

and then click “Backup” button to pop up the “Record Backup” window as shown below.

Select the device name, backup format and path and then click “Backup” button to start the

backup.