User Manual

Alarm Management
NVR User Manual
74
9.3.2 Exception
Exception Configuration:
① Click StartSettingsCameraIntelligent DetectionException to go to the following
interface.
② Select the camera and enable the relevant detection as required.
Scene Change: The relevant alarms will be triggered if the scene of the monitor video has
changed.
Video Blurred: The relevant alarms will be triggered if the monitor video is blurred.
Video Color Cast: The relevant alarms will be triggered if color cast happens to the monitor
video.
③ Set the duration and drag the slider to set the sensitivity of the exception detection.
The sensitivity value of Scene Change Detection: the bigger the value is, the more sensitive
the system responds to the amplitude of the scene change.
The sensitivity value of Video Blur Detection: the bigger the value is, the more sensitive the
system responds to the defocus of the device image. You should just the value according to the
real situation.
The sensitivity value of Video Color Cast Detection: the bigger the value is, the more
sensitive the system responds to the color cast of the device image. You should also consider
other factors.
④ Click “Apply” to save the settings.
⑤ Click “Processing Mode” to go to the alarm handling configuration interface of exception
detection.
Exception Alarm Handling Configuration:
① Click StartSettingsAlarmIntelligence AlarmException to go to the interface.