Quick Start Guide

2 NETWORK VIDEO RECORDERS | AVR SERIES
HDD Installation
This NVR supports two 3.5” or 2.5” SATA hard disk drives.
Caution: DO NOT install or remove the hard disk drive while the device power is turned ON.
a) Connect the data and power cables to the
two hard disk drives and place the hard disk
drives on the NVR case.
b) Carefully flip the NVR case and secure the
hard disk drives to the NVR with the eight (8)
screws.
2.5"HDD 2.5"HDD
3.5"HDD 3.5"HDD