User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 Wizard & Main Interface
- 4 Camera Management
- 5 Live Preview Introduction
- 6 PTZ
- 7 Record & Disk Management
- 8 Playback & Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Compatible Device List
Alarm Management
DVR User Manual
77
② Enable or disable “Snapshot”, “Push”, “Ala rm-out”, “Preset”, “Buzzer”, “Pop-up Video”,
“Pop-up Message Box” and “E-mail”. The IPC Offline Settings are similar to that of the sensor
alarm (see 9.1 Sensor Alarm
for details).
③ Click “Apply” to save the settings.
9.4.2 Video Loss Settings
① Click StartSettingsAlarmExceptionVideo Loss Settings to go to the interface as
shown below.
② Enable or disable “Snapshot”, “Push”, “Ala rm-out”, “Preset”, “Buzzer”, “Pop-up Video”,
“Pop-up Message Box” and “E-mail”. The Video Loss Settings are similar to that of the sensor
alarm (see 9.1 Sensor Alarm
for details).
③ Click “Apply” to save the settings.
9.4.3 Exception Handling Settings
① Click StartSettingsAlarmExceptionException Handling Settings to go to the
interface as shown below.
② Enable or disable “Alarm-out”, “Buzzer”, “Pop-up Message Box” and “E-mail”. The
exception handling settings are similar to that of the sensor alarm (see 9.1 Sensor Alarm
for
details).