Manual

Enable pattern lock and click “Edit” to set the pattern lock.
Click “Next” to set questions and answers for password security of admin. If you
forget the password, please refer to Q4 in Appendix A FAQ for details.
Click “Next” to continue.
If the DVR has two network ports or above, you can select the network work
pattern as required. Network Fault Tolerance and Multiple Address Setting are
available.
Wizard & Main Interface
15
④
⑤
Disk Settings. You can view the disk number, disk capacity of the DVR and
serial number, R&W status of the disk. Click “Format” to format the disk. Click
“Next” to continue. Then click “Wizard Setup”.
Network Settings. Check “Obtain an IP address automatically” and
“Obtain DNS automatically” to get the IP address and DNS automatically (the
DHCP function of the router in the same LAN should also be enabled), or manual-
ly enter them. Enter the HTTP port, RTSP port and Server port (please see 11.1.2
Port Configuration for details). Click “Next” to continue.