User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 Wizard & Main Interface
- 4 Camera Management
- 5 Live Preview Introduction
- 6 PTZ
- 7 Record & Disk Management
- 8 Playback & Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Compatible Device List
Device Management
DVR User Manual
93
images automatically if it is not operated during the time you set.
11.2.2 Date and Time Configuration
Click StartSettingsSystemBasicDate and Time to go to the interface as shown below.
Set the system time, date format, time format and time zone of the DVR. The default time
zone is GMT+08 Beijing, Hong Kong, Shanghai, Taipei. If the selected time zone includes DST,
the DST of the time zone will be checked by default. Click “Apply” to save the settings.
You can manually set the system time or synchronize system time with network through NTP.
Manual: select “Manual” in the “Synchronous” option and then click
after the “System
Time” option to set the system time.
NTP: select “NTP” in the “Synchronous” option and then input the NTP server.
11.3 Factory Default
Click StartSettingsSystemMaintenanceFactory Default and then click the “Reset to
factory default” button in the interface to reset to the factory default settings (check “Reset
retain Network Configuration” to retain the network settings).
Note: Resetting to the factory default settings will not change time zone.
11.4 Device Software Upgrade
Common Upgrade
You can click StartSettingsSystemInformationBasic to view MCU, kernel version and
firmware version and so on. Before upgrade, please get the upgrade file from your dealer.
The upgrade steps are as follows: