Manual

Introduction
DVR User Manual
3
 Support a maximum of 10 backup tasks in background and backup status viewing
Alarm Management
 Support alarm schedule setting
 Support enabling or disabling of the motion detection, external sensor alarm input,
intelligence alarm and exception alarms including IP address conflict alarm, disk IO error alarm,
disk full alarm, no disk alarm, illegal access alarm, network disconnection alarm, IPC offline
alarm and so on, alarm trigger configuration supportable
 Support IPC offline alarm trigger configuration of PTZ, snap, pop-up video, etc.
 Support event notification modes of alarm-out, pop-up video, pop-up message box,
buzzer, e-mail and so on
 The snapped images can be attached into the e-mail when alarm linkage is triggered
 Support alarm status view of alarm-in, alarm-out, motion detection and exception alarm
 Support alarm to be triggered and cleared manually
 Support system auto reboot when exception happens
Network Functions
 Support TCP/IP and PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP protocol and so on
 Support black and white list function and the black and white IP address/IP
segment/MAC address can be set
 Support multiple browsers including IE8/9/10/11, Firefox, Opera, Chrome (available only
for the versions lower than 45) and Safari in MAC system
 Support remote achievement, configuration, import and export of the DVR parameters
and other system maintenance operations including remote upgrading and system restart
 Support remote camera configuration of the DVR including video parameters, image
quality and so on
 Support remote searching, playback and backup of the DVR
 Support manual alarm to be triggered and cleared remotely
 The auto-focusing camera can be adjusted through web client (support zoom in/out, but
one key focus is not currently supported)
 Support NVMS or other platform management software to access the DVR and manage it
 Support NAT function and QR-Code scanning by mobile phone and PAD
 Support mobile surveillance by phones or PADs with iOS or Android OS
 Support DVR to be accessed remotely through telnet and the telnet function can be
enabled or disabled
 If one camera recording is enabled or disabled manually through web client, it will be
simultaneously enabled or disabled in the DVR
Other Functions
 The DVR can be controlled and operated by the buttons on the front panel, the remote
controller and the mouse
 Setting interfaces can be switched to one another conveniently by clicking the main
menus on the top of the setting interfaces
 Support DVR information viewing including basic, camera status, alarm status, record
status, network status, disk and backup status