Manual

EMO‐3000
OperationandProgrammingManual


43


USEDIN:  PIDmode.
RELATEDVARIABLES:  A_KD/A_KP/A_KI
HEXADDRESS:  00DEHEX‐‐‐‐>SAMEAD DRESSASINEMO‐2000
BYTES:  2BytesDEFAULT:210
ASCformCOMMAND:  reading=123;writing=523;EandNbothhavethesameeffect
value.Byadding/XXcr,whereXXiscolornumber(example: 
#01E113/12cr),theGainfactorforthecolor12isreturned.
Omitting/XXreturns0.
mAScalerforPID
Themilliampsscalerisusedforscaling0‐20mAmpanalogsignalinput.Eachmilliampabovethemilli
ampsinoffsetrepresentsacertainamountofrequestedflowinengineeringunitsorHertz.
USEDIN:  PIDmode.
RELATEDVARIABLES:  mA’offset
HEXADDRESS:  01B3HEX‐‐‐‐>SAMEADDRESSASINEMO‐2000
BYTES:  2BytesDEFAULT:21cc/mpermA
ASCformCOMMAND:  reading=126;writing=526;Ereturnstheengineering
units/mA;NreturnsHz/mA’s.
mAInOffset
Usedtoevenoutsourcesthatdonotdeliverexactly4.00mA’s.Inpractice,itreplacesaadjustment
potentiometer.
USEDIN:  PIDmode.
RELATEDVARIABLES:  mA’scaler
HEXADDRESS:  00E6HEX‐‐‐‐>NEWVARIABLE
BYTES:  2BytesDEFAULT:825(4.02mA)
ASCformCOMMAND:  reading=124;writing=524;EreturnsthemA’svalue;Nreturns
counts.