Owner's manual

RT‐10FlowMonitor
OperationandProgrammingManual


20


ClockModeProgramming 
UsetheClockDisplayModetosetthetimeonthereal‐timeclock(ifnecessary),andtoprogra mthe
“SleepTime.”TheSlee pTimedetermin es thelengthoftheperiodofinactivity(nopulseorswitch
activity)beforetheRT‐Ex10“sleeps”toconserveenergy.
SettingtheTime
Toview
theClockDisplayMode,usetheDN/MODEbuttonormagneticswitch.PressandholdtheENT
buttonoractivate,andmaintaintheENTmagneticswitch,for3secondsuntilthedisplay(briefly)
indicates“tinE‐P”(timeprogramming )f o llowedbythecurrenthour(HH::),whichblinks.UseUP/DN
to
setthehoursandthenENTtocontinue.
Thecurrentminutes(HH: MM:)becomevisible andblink.UseUP/DNtosettheminutesandthenENT
tocontinue.

SecondsbeginatzerotheinstantyoupressENT.
SleepTimer
Thedisplay(briefly)indicates“SLEEPt”(SleepTime)followedbythecurrentSleep
Timevalue.Program
theSleepTimeinminutes;defaultvalueis5minutes.Theminimumvalueallowedis2minutesandthe
maximum254minutes.Ifyouenteravaluelessthan2orgreaterthan254,thedisplayrevertstothe
mininimumormaximumvalue.WhenyoueditSleep
Time,theleftmostdigitblinks(cursor).UseSELto
movethecursortotheright.Thecursorwrapsaround.UseUPorDNtoincrementordecrement
numerals.Editthedecimalpointlast.UseDNtomove thedecimalpointtotheright,UPtomoveitto
theleft.When
thedesiredvalueappears,useENTtostorethevalueandexitClockprogramming.

Notice
ENT
HOLD ENT
HOLD
3 SEC.
1 SEC
ENT ENT
1 SEC
MODE
TO
RATE
DISPLAY
SETTING THE TIM E
SLEEP TIM ER
USE UP/DOWN TO
SET M INUTES.
WHEN MINUTES ARE
SET PRESS ENT TO
START CLOCK AT
ZERO SEC.
USE UP/DOWN TO
SET HOURS. PRESS
ENT WHEN DONE.
ENTER TIM E IN M IN.
FOR SLEEP AFTER
INACTIVITY. (2 M IN.
IS MINIMUM).
1 SEC
DISPLAYS
BRIEFLY
DISPLAYS
BRIEFLY
DISPLAYS
BRIEFLY
MODE
FROM TOTAL DISPLAY