Manualshelf

User guide

ManualsBrandsAWA ManualsDo-It-Yourself toolsLTW-42D
81828384858687888990
Device Settings 80
The MEID (Mobile Equipment Identifier) is the unique second-generation serial number
assigned to the 3G component of the device.
● PRL Version — The PRL (Preferred Roaming List) is an account configuration item set
by your service provider. It controls the radio channels and network carrier used by the
3G modem. An updated PRL may improve your 3G network service.
● PRI Version — This is the PRI version of the 3G component of the device.
● Firmware Version — This is the firmware version of the 3G component of the device.
● Total Bytes — This is the amount of data transferred over the 4G network during the
lifetime of the device.
● Firmware Version — This is the firmware version of the 4G component of the device.
● MAC Address — This is the MAC address of the 4G module. Each wireless device has
a unique MAC address (assigned by its manufacturer).
● DDF ID — This is the version information of your 4G channel plan, which determines the
frequencies to scan and 4G networks to detect.
● Total Bytes — This is the amount of data transferred over the 4G LTE network during
the lifetime of the device.
● Firmware Version — This is the firmware version of the 4G LTE component of the
device.
● MAC Address — This is the MAC address of the 4G LTE module. Each wireless device
has a unique MAC address (assigned by its manufacturer).
● Driver Version — This is the version of the 4G LTE driver of the device.
The window also has buttons to:
● Save the information to a text file.
● Reset the 3G and 4G configuration of the device to default settings (Reset Device to
Factory Defaults). (See Resetting the 3G and 4G Configurations to Default Settings.)
● Reset the 3G and 4G configuration of the radios of the device to default settings (Reset
Radios to Factory Defaults). (See Resetting the 3G and 4G Radio Configurations to
Default Settings.)
Tip: You can view some of the above information on the “About...” LCD information screen.
(See LCD Information Screens.)
Device Tab: Log Panel
Configure settings related to the logging of events.