User guide

Device Settings 93
3. Click Router.
4. Depending on the settings you want to configure, click one of the panels:
 Basic. (See Basic Panel: General.)
 LAN. (See LAN Panel: General.)
 Port Forward — Port forwarding lets you forward incoming traffic to specific ports
and devices (per their local IP address) on your network. (See Port Forward Panel:
General.)
 Port Trigger — You can set the device to monitor outgoing data on specific port
numbers (trigger ports). (See Port Trigger Panel: General.)
 DMZ — You can select one computer to receive all unsolicited incoming
connections. (See DMZ Panel: General.)
Basic Panel: General
You can enable or disable various features of the router component of your device.
To access this panel:
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click Router > Basic.
From this window, you can enable or disable these features, and perform these actions:
● USB Tethered Networking — To prevent an unauthorized user from using the device
through the micro-USB cable, set this field to Disable. Users will be able to connect only
through Wi-Fi and only after they provide the correct Wi-Fi password (if Wi-Fi security is
enabled).
This setting does not affect the ability to charge the Sierra Wireless 4G LTE Tri-Fi
Hotspot through the micro-USB cable.
● Port Forwarding — Port forwarding lets you forward incoming traffic to specific ports
and devices (per their local IP address) on your network. (See Port Forward Panel:
General.)
● Port Triggering — You can set the device to monitor outgoing data on specific port
numbers (trigger ports). (See Port Trigger Panel: General.)
● DMZ — You can select one computer to receive all unsolicited incoming connections.
(See DMZ Panel: General.)