Operator`s manual

Operation LTW 20Z
30 wc_tx001058gb.fm
3.3 Leveling Trailer
P
Procedure Follow the procedure below to level the trailer.
1. Pull the locking pin on the tongue jack (a) and rotate the tongue jack down 90°
as shown. Reinsert the pin once the jack is in position.
2. Block or chock the trailer wheels (b). Crank the tongue jack down to raise the
trailer tongue off the vehicle.
3. Pull the outrigger lock pin (c) to release the outrigger. Pull both outrigger
extensions (d) out until you feel outrigger lock pin lock back into place.
4. Pull the locking pins on the outrigger jacks (e). Rotate the jacks 90° down.
Reinsert the pins once the jacks are in position.
5. Pull the locking pin on the rear jack (f) and rotate the rear jack down 90° as
shown. Reinsert the pin once the jack is in position.
6. Extend the jack(s) on the highest side(s) of the trailer until they rest firmly on the
ground. Extend the remaining jacks until the trailer is level.
WARNING
Tipping / falling hazard. Failure to level the trailer or extend the outriggers will
severly reduce the stability of the unit.
f Level the trailer and extend the outriggers before raising the tower. The
outriggers must remain extended while the tower is up.
wc_gr005874