PCD-792 MP3/CD/Radio Audio System INSTRUCTION MANUAL Before use, please read the manual carefully.
WARNING 1. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus. 2. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. 3. WARNING: Excessive sound pressure from earphones and headphones can cause hearing loss. 4.
WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference. 3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS - All operating instructions should be followed. 5.
LOCATION OF CONTROL 17 1 2 3 4 5 6 7 16 15 14 13 12 8 9 10 11 18 19 26 25 20 24 23 21 22 1. LCD DISPLAY 2. REMOTE SENSOR 3. STANDBY 4. TIME 5. HOUR 6. MINUTE 7. VOLUME 8. SKIP 9. SKIP + 10. STOP 11. PLAY / PAUSE 12. VOLUME + 13. MODE 14. PROGRAM 15. ALBUM + 16. EJECT 17. CD DOOR 18. FM ANTENNA 19. BAND SELECTOR 20. TUNING CONTROL 21. BATTERY BACKUP 22. AC CORD 23. PHONES JACK 24. AUX IN 25. BASS SELECTOR 26.
REMOTE CONTROL 1. STANDBY 2. VOLUME 3. PLAY / PAUSE 4. SKIP 5. MODE 6. STOP 7. OPEN / CLOSE 8. VOLUME + 9. SKIP + 10. ALBUM + 1 7 2 3 8 4 9 5 10 6 BATTERY INSTALLATION Insert 2 x “AAA” size batteries into the battery compartment. Be sure that the batteries are inserted correctly to avoid damage to the remote control. Always remove the batteries when the remote control will not be used for a long period of time, as this will cause leakage to the batteries a nd subsequently damage to your set.
RADIO OPERATION GENERAL OPERATION 1. 2. 3. 4. Set the “FUNCTION” selector to “RADIO” mode. Select desired band by using the “BAND” selector. Adjust radio frequency to your desired station by using the “TUNING” control. Adjust the “VOLUME” control to the desired level. FM / FM-STEREO RECEPTION - Set the “BAND” selector to FM mode for MONO reception. - Set the “BAND” selector to FM ST. mode for FM STEREO reception. The Stereo indicator light up to show FM ST. mode.
CD / MP3 OPERATION GENERAL OPERATION PLAY / PAUSE Press to start playing CD / MP3 disc. Press again to stop playing CD / MP3 operation temporarily. Press again to resume playback. SKIP + SKIP - Press to go to the next track or back to the previous track. Press and hold while playing until you find the point of the sound. & STOP Press to stop all CD / MP3 operation. EJECT Press to open / close the CD door. PLAYBACK 1. 2. 3. 4. 5. 6. 7. 8. Set the “FUNCTION” selector to “CD” mode.
CD / MP3 OPERATION PROGRAM Be sure to press the “STOP” button before use. 1. Press the “PROGRAM” button, the display will show “P01” and flash. 2. Select desired track by using the “SKIP +” or “SKIP -” button. ( You may select a desired album by pressing “ALBUM +” button. ) 3. Press the “PROGRAM” button again to confirm desired track into the program memory. 4. Repeat step 2 and 3 to enter additional tracks into the program memory. 5.
OTHER FEATURES CLOCK SETTING To adjust clock setting, make sure not in radio mode. 1. Press the “TIME SET” button. (Do not release “TIME SET” button during time setting) 2. Press the “HOUR” button to set hour. 3. Press the “MIN” button to set minute. 4. Release all button to confirm setting. Confirmed setting will on the display.
CARE AND MAINTENANCE COMPACT DISCS Treat compact discs carefully. Handle them only by their edges. Never allow your fingers to touch the shiny, unlabelled side of the disc. Do not put adhesive tape, stickers etc. on either side of a disc. Clean discs periodically with soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean discs. If necessary, use a CD cleaning kit. If a disc skips or gets stuck during playback it is probably dirty or damaged (scratched).
TROUBLESHOOTING GUIDE If you have a problem, please check the following chart to see if you can fix it before consulting a servicing professional.
SPECIFICATIONS GENERAL Power source ---------------------------------- AC ~240V 50Hz Remote control---------------------------------- DC 3V(1.