User's Manual

Vaccines for Children |

Installation and Setup Guide

4. Place the battery back in the Display and replace the battery cover.

NOTE: Placing the battery back in the Display with the connector wires on top of

the battery instead of underneath makes it easier to close the cover and to

remove the battery later on for changing.

5. Power on the Display by pressing and holding the Mode button for 8 seconds.

6. When the Display powers on, immediately provision the device.

4.3.7 Provisioning the VFC Display

After a device (tag, display, or beacon) has been batch created, it must be provisioned

so that it can connect to the network and provide location information for tags. Use the

following procedure to provision a device.

NOTE: Before beginning this procedure, an Awarepoint router must be connected

and running close to the tablet running the provisioning application.

Without this router, the SSID for the site will not be available to the app

and the provisioning procedure will fail.

1. Open the Provisioning app on the Awarepoint tablet.