User's Manual

67
System Manager User Guide |
System Manager 2.0
o Removal Detection: When checked, sends a removal alert if Tag is
removed from asset
o Wifi Blink in absence of beacons: When checked, Tag sends out WiFi
blinks if no Beacon is detected
NOTE: Unless there is a specific reason to make changes, such as accuracy
testing, the default numbers for these fields should be sufficient.
3. Click Submit to apply any changes made.
Alternatively, click Cancel to cancel any changes made.
6.1.4 Creating a New Configuration
You create a new configuration by copying a previously existing one and renaming it,
then adjusting the configuration parameters as necessary.
1. In the explorer pane, drill down to the configuration that you want to copy and
select it.
2. At the bottom of the configuration settings pane, click the Copy button.
3. In the Device Configuration Name field, enter the name for the new
configuration.
4. Enter or edit the new configuration parameters.
5. Click Submit to save the changes and create your new configuration settings.
6.2 Network Config
Clicking the Network Config tab displays the following screen:
Network configuration information for filling in the fields is gathered by the Project
Management team and given to the ASA team to be entered on site.