User's Manual

87
System Manager User Guide |
System Manager 2.0
6. To remove a marker, click the Delete layers icon and then click the marker icon
to be deleted.
If there are multiple markers, you must click the Delete layers icon once for each
marker you want to remove.
7. After making all changes necessary, click Save to update the Distance Test.
NOTE: Updating a Distance Test does not erase the test’s historical runs. The
data from previous test runs, if applicable, will display along with any new
data.
7.2.3 Cloning a Distance Test
Cloning a test is done to create a test substantially similar to one already in existence
but without deleting one or creating a new one from scratch. This is especially useful
for retaining historical test run data but also for tests that may be run on the same floor
with the same parameters.
1. From the Distance Tests window, select the test you want to clone then click the
Clone button in the lower right corner.
The Update Distance Test window displays.
2. Enter a new name for the cloned test.
3. If necessary, enter a new duration.
4. Click the Regions link and select a new floor, if necessary.
5. Click the PIDS link and select the new Tags, if necessary.
6. If necessary, use the Delete layers icon to remove the current marker, then
place a new marker.