User's Manual

System Manager User Guide |

System Manager 2.0

4.7.2 Changing a Region Type

Region Types are not fixed and can be changed as needed. The following procedure

provides the steps for changing the region type of a floor but can be used to change the

region type of a campus, building, or area as well.

1. From the list on the left, select the floor whose region type you want to change.

2. In the Floor Manager area, from the Region Type drop-down list, select the new

region type to assign to the floor.

3. Click the Update Floor button.

4.8 Placing a Beacon on a Map

NOTE: You can place a beacon on a map at any time; however, it will not connect

to the network and provide location information until after it has been

batch created and provisioned. Refer to the

Create section for the

procedures to batch create and provision beacons.

1. Expand the list on the left to locate the floor where you will be placing the

beacon.

2. Click the floor.

The floor name will become bold in the list and the map of the floor displays.