User's Manual

43
System Manager User Guide |
System Manager 2.0
3. In the MAC Addresses or Product ID's (PID): field, enter the MAC address or
product ID (PID) of the device or devices.
You can copy and paste this information or enter it by hand. Different MAC
addresses or PIDs must be separated by commas or by carriage returns (one
item per line).
4. Click Create.
5.5.1 Provisioning Beacons
After a device (beacon) has been created, it must be provisioned so that it can connect
to the network and provide location information for tags. Use the following procedure to
provision beacons.
NOTE: Before beginning this procedure, an Awarepoint router must be connected
and running close to the tablet running the provisioning application.
Without this router, the SSID for the site will not be available to the app
and the provisioning procedure will fail.
1. Open the Provisioning app on the Awarepoint tablet.
Figure 9 Provisioning Application Main Screen
The following areas should be noted as identified in the figure above:
1) Application version
2) The Environment URL drop-down list
3) The REQUEST TOKEN button
4) The SYNC WITH SITES FROM IP button