User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Steps
- 3 Step #1 – Configure Regions
- 4 Step #2 – Preparing for Installation
- 5 Step #3 – Installing the Appliance
- 6 Step #4 – Installing the Bridge
- 7 Step #5 – Installing the Sensors
- 8 Step #6 – Installing the Tags
- 9 Step #7 – Associating the Tags with Assets
- 10 Step #8 – System Testing and Quality Control
- 11 Adding Additional Assets After Installation
- 12 Troubleshooting
Introduction 3
Installation Guide v2.3 – 5/10
Confidential and Proprietary ©2010, Awarepoint Corporation
The System is configured using the System Manager, a Java application that runs on a
PC connected to the facility LAN. The System Manager may be downloaded from the
Awarepoint Appliance or from the Network Operations Center.