User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Steps
- 3 Step #1 – Configure Regions
- 4 Step #2 – Preparing for Installation
- 5 Step #3 – Installing the Appliance
- 6 Step #4 – Installing the Bridge
- 7 Step #5 – Installing the Sensors
- 8 Step #6 – Installing the Tags
- 9 Step #7 – Associating the Tags with Assets
- 10 Step #8 – System Testing and Quality Control
- 11 Adding Additional Assets After Installation
- 12 Troubleshooting
Step #4 – Installing the Bridge 28
Installation Guide v2.3 – 5/10
Confidential and Proprietary ©2010, Awarepoint Corporation
If No:
– Link Speed – 10/100
– Duplex Mode – Half/Full
▪ DHCP – Yes/No
Figure 33 - DHCP option
If No:
– IP Address
Figure 34 - Static IP Address
– Subnet Mask
Figure 35 - Subnet Mask
– Default Gateway
Figure 36 - Default Gateway
▪ Auto Discover Server – Yes/No
Figure 37 - Auto Discover Server