User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Steps
- 3 Step #1 – Configure Regions
- 4 Step #2 – Preparing for Installation
- 5 Step #3 – Installing the Appliance
- 6 Step #4 – Installing the Bridge
- 7 Step #5 – Installing the Sensors
- 8 Step #6 – Installing the Tags
- 9 Step #7 – Associating the Tags with Assets
- 10 Step #8 – System Testing and Quality Control
- 11 Adding Additional Assets After Installation
- 12 Troubleshooting
Step #7 – Associating the Tags with Assets 59
Installation Guide v2.3 – 5/10
Confidential and Proprietary ©2010, Awarepoint Corporation
1. Choose
Asset Types through the link in the left hand pane.
2. Choose the Edit button next to the asset type.
3. Choose the Set Minimum Temperature and Set Maximum Temperature
checkboxes. Then set the minimum and maximum temperatures in Celsius.