User's Manual

Service (Digital Only)

Service allows access to special supplementary services dened by the DMR

standard. They may or may not be activated in programming. They will mainly be

used only in supervisor or management radios for transmission. These selectable

items are Call Prompt, Remote Monitor, Radio Check, Radio Kill,

and Active.

Call Prompt – This allows a user to ping another user over the air.

Remote Monitor – Provides the ability to remotely activate a targeted radio’s

transmitter. This is generally used for life safety.

Radio Check – Allows the entry of a UID of target radio to verify that it is on the air.

Remote Kill – When command is sent to a targeted radio, the receiving radio will

be disabled until activated. This is generally used to deactivate stolen or missing

radios.

Active – Active is used to reactivate a radio that has received a remote kill

command.