User's Manual
Function and basic operation
Turning your radio on and o
Power on: Turn selector (power switch/ volume control knob)
clockwise. Click will be heard when selector turns the radio on. If
programmed, a power-on tone will be heard and the radio will enter the
receive state.
Power o: Turn selector (power switch/ volume control)
counterclockwise until a click is heard. This indicates that the radio is
powered o.
Switch channel
When you need to make a call on a specic channel, rotate the
channel knob to the desired channel. If the channel broadcast function
is enabled, the channel number will be announced locally. If a channel
has not been populated via programming, a continuous tone will be
heard from the radio.
Push-to-talk operation
Select the desired channel with the channel selector.
Transmit: Hold the radio in a vertical position approximately 2.0 cm
(1.0 inches) from your lip. Press the PTT and speak.
Receive: The LED indicator will light green when a signal is
received and the speaker will emit audio. Adjust the volume control
knob for a comfortable level.
8