Product manual

5 Package
5.1 Package supplied
When you order an amplifier from the SERVOSTAR 300 series (order numbers ð p.106),
you will receive:
— SERVOSTAR 3xx
— mating connectors X0, X3, X4, X8, X9 only with SERVOSTAR 303-310 (S3xx6)
The mating SubD connectors are not part of the package!
— Assembly, Installation and Setup instructions (product manual)
— Online documentation on CD-ROM
— Setup software DRIVEGUI.EXE on CD-ROM
Accessories :
(must be ordered separately, if required)
— synchronous servomotor (linear or rotary)
— motor cable (prefabricated), or both power connectors separately,
with the motor cable as a cut-off length
— feedback cable (prefabricated)
or both feedback connectors separately, with the feedback cable as a cut-off length
— motor choke 3YLN (ð p.103), for motor cables longer than 25 meters
— external regen resistor BAR(U) (ð p.102)
— communication cable to the PC (ð p.58) for setting parameters from a PC
— power cable, control cables, fieldbus cables (as cut-off lengths)
5.2 Nameplate
The nameplate depicted below is attached to the side of the servo amplifier.
The information described below is printed in the individual fields.
14 SERVOSTAR
®
300 Product Manual
Package 09/2006 Kollmorgen
Typenbezeichnung
Spannungsversorgung
Model Number
Power Supply
Ser. Nr
Nennstrom
Ser. No.
Nom. Current
Bemerkung
Schutzart
Comment
Encl.Rating
Danaher Motion GmbH
Wacholderstr. 40-42
D-40489 Düsseldorf
www.DanaherMotion.com
Customer Support
Europe Tel. +49 (0)203 / 99790
Italy 3 36 594260
North America 1
Tel. + 9 (0) 2 /
Tel. + 540 633 3400
Umgebungstemp.
Ambient temp.
E217428
1VD4
LISTED
IND. CONT. EQ.
CUS
U
L
®
example
example
Hardware
Revision
CommentsSerial number
Servo amplifier type
max. ambient
temperature
Output current
in S1 operation
Hardware
Revision
Enclosure Rating
Electrical supply
Installed load