Installation & Operation Manual

UTM-300 - 9 - 7/10/2019
1 INTRODUCTION
AWID's UTM-300 is a Radio Frequency IDentification (RFID) reader module capable of
working with most leading passive UHF tags. The reader module comes with a unique
combination of antenna port, small size, and low power consumption. Its primary
functions are in asset management and tracking, and fleet management, i.e., embedded
applications for PoS, printers and other portable devices widely used i n these markets.
UTM-300 is delivered with Firmware Version such as 12.xx.xx.
In order to operate a UTM-300 you will need the following:
 PC running Windows
1
XP or higher, CD-ROM drive
 Host software (AWID’s demo software or your own custom software)
1.1 SPECIAL FEATURES
 EPC Global Class 1 Gen 2 Protocol
 Thin passive tags with long-range performance
 Low power consumption & compact design for portable & embedded applications
 3.3 V (5.0V tolerable) Serial TTL logical interface

1
Though UTM-300 can also be controlled from a non-Windows programming platform, AWID demo and
FW upgrade programs are applications to run in Windows.
UTM-300 - 9 - 7/10/2019
1 INTRODUCTION
AWID's UTM-300 is a Radio Frequency IDentification (RFID) reader module capable of
working with most leading passive UHF tags. The reader module comes with a unique
combination of antenna port, small size, and low power consumption. Its primary
functions are in asset management and tracking, and fleet management, i.e., embedded
applications for PoS, printers and other portable devices widely used i n these markets.
UTM-300 is delivered with Firmware Version such as 12.xx.xx.
In order to operate a UTM-300 you will need the following:
 PC running Windows
1
XP or higher, CD-ROM drive
 Host software (AWID’s demo software or your own custom software)
1.1 SPECIAL FEATURES
 EPC Global Class 1 Gen 2 Protocol
 Thin passive tags with long-range performance
 Low power consumption & compact design for portable & embedded applications
 3.3 V (5.0V tolerable) Serial TTL logical interface

1
Though UTM-300 can also be controlled from a non-Windows programming platform, AWID demo and
FW upgrade programs are applications to run in Windows.
UTM-300 - 9 - 7/10/2019
1 INTRODUCTION
AWID's UTM-300 is a Radio Frequency IDentification (RFID) reader module capable of
working with most leading passive UHF tags. The reader module comes with a unique
combination of antenna port, small size, and low power consumption. Its primary
functions are in asset management and tracking, and fleet management, i.e., embedded
applications for PoS, printers and other portable devices widely used i n these markets.
UTM-300 is delivered with Firmware Version such as 12.xx.xx.
In order to operate a UTM-300 you will need the following:
 PC running Windows
1
XP or higher, CD-ROM drive
 Host software (AWID’s demo software or your own custom software)
1.1 SPECIAL FEATURES
 EPC Global Class 1 Gen 2 Protocol
 Thin passive tags with long-range performance
 Low power consumption & compact design for portable & embedded applications
 3.3 V (5.0V tolerable) Serial TTL logical interface

1
Though UTM-300 can also be controlled from a non-Windows programming platform, AWID demo and
FW upgrade programs are applications to run in Windows.