Installation Guide

ManualsBrandsAwntech ManualsAwningsCF32-10BT

San Francisco Style Awnings

ASSEMBLY AND INSTALLATION INSTRUCTIONS

CAUTION: When you are opening the box keep children away. This

awning frame contains sharp metal and small hardware parts.

Choking hazard: Keep parts away from children. They may choke on

hardware. Be extremely cautious around children.

Models with Valance:

RF22, EF23, CF32, CF34, CF43, CF44, EF2442, EF12, EF1836, EF1230, EF1030, EF24, CF33

Models with-out Valance:

RF22-NV, EF23-NV, CF32-NV, CF34-NV, CF43-NV, CF44-NV, EF2442-NV, EF12-NV, EF1836-

NV, EF1230-NV, EF1030-NV, EF24-NV, CF33-NV

All the awning sizes over 9’ wide come in two parts such as Top Bar (TB) consist of TB1 &

TB2 and Front Bar (FB) consist of FB1 & FB2

See the chart below for the width of the awning:

Width in

inches

Size

Width in

inches

3 40.5 12 148.5

4 52.5 13 160.5

5 64.5 14 172.5

6 76.5 15 184.5

Size

16 196.5

8 100.5 17 208.5

9 112.5 18 220.5

10 124.5 19 232.5

11 136.5 20 244.5

THESE AWNINGS ARE DESIGNED 4-1/2” WIDER THAN THE OPENINGS YOU ARE

COVERING. (EXAMPLE: a RF22-5 is for a 5’-0” wide window. It is built 64-1/2” wide,

24” tall plus 7” valance height and 24” deep or projection.

Summary of content (8 pages)

PAGE 1
San Francisco Style Awnings ASSEMBLY AND INSTALLATION INSTRUCTIONS CAUTION: When you are opening the box keep children away. This awning frame contains sharp metal and small hardware parts. Choking hazard: Keep parts away from children. They may choke on hardware. Be extremely cautious around children.
PAGE 2
Due to the wide variety of building surfaces, Awntech does not supply the hardware to install your awning on the wall. You will need to purchase installation hardware at your local do-it-yourself center. We will advise you on different surface applications. • • Please read the instructions fully before assembly. This awning must be fully assembled prior to installing it onto the wall. STEP 1: Separate all of the parts by part number so they will be easy to assemble.
PAGE 3
STEP 7: Additional parts Hypotenuse (NC) and Wall Supports or Projection Bar Assembly (WS or PA) are provided for extra support STEP 8: Install additional NC to complete the frame assembly STEP 9: Wall Supports or Projection Bar Assembly (WS or PA) are installed only if needed after the Awning is hung on the wall INSTALLING THE COVER STEP 10: Slide the bead at the top of the fabric into the C-Channel at the top of (TB).
PAGE 4
STEP 15: From the inside of the awning, make (2) marks on the wall 6” up from that line where the awning frame touches the wall. . This is where the bottom of the brackets will be placed. STEP 16: From the inside of the awning, make two marks on the wall 6” in from the top outside corners of the awning where the (CNB) and (TB) bars meet the wall. Make another mark at the center of (TB). This is where the top brackets will be placed.
PAGE 5
WARRANTY 5-Year Limited Manufacturer's Warranty A. WHO GIVES THIS WARRANTY? Awntech Corporation B. WHO IS ENTITLED TO THIS WARRANTY? This Warranty applies only to the original purchaser who paid for the product and may not be assigned or transferred to subsequent owners. This Warranty applies only to products purchased and installed in the US. C.
PAGE 6
OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. 4. THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. G. RETURNS, DAMAGES RETURN QUALIFICATION: You can only return a product if it is defective upon arrival.
PAGE 7
For Frame sizes 2’ – 4’ (Must be assembled on the floor)
PAGE 8
For 5’-7’ sizes.