Installation Guide

ManualsBrandsAWNTECH ManualsAwnings10.38 ft. Wide New Yorker Window/Entry Awning (44 in. H x 24 in. D) Linen/White

New Yorker Style Awning

OWNER’S MANUAL & INSTALLATION INSTRUCTIONS

WARNING: CHOAKING HAZARD – Contains small part, and Sharp metal. CAUTION:

When you are opening the box keep children away. Be extremely cautious around

children.

Models with Valance:

RN22, EN23, CN32, CN43, CN44, EN2442, EN12, EN1836, EN1230, EN1030, EN24, CN33,

NY1618, NY1624, NY1630, NY1818, NY1830, NY2430, NY2436, NY3024, NY3030, NY3036,

NY3048, NYCUSTOM

Awning size

Width in inches

Awning Size

Width to Inches

40.5

148.5

52.5

160.5

64.5

172.5

76.5

184.5

88.5

196.5

100.5

208.5

112.5

220.5

124.5

232.5

136.5

244.5

OUR AWNINGS ARE DESIGNED 4.5” WIDER THAN STANDARD WINDOW/DOOR

OPENINGS SO THEY ANCHOR TO THE STUDS AROUND THE WINDOW OR DOOR.

EXAMPLE: RR22-5 IS FOR 5’-0” WIDE WINDOW. IT MEASURES 64.5” WIDE, 31” TALL, (24”

PLUS 7” VALANCE AND 24” DEEP (PROJECTION)

Summary of content (11 pages)

PAGE 1
New Yorker Style Awning OWNER’S MANUAL & INSTALLATION INSTRUCTIONS WARNING: CHOAKING HAZARD – Contains small part, and Sharp metal. CAUTION: When you are opening the box keep children away. Be extremely cautious around children. Models with Valance: RN22, EN23, CN32, CN43, CN44, EN2442, EN12, EN1836, EN1230, EN1030, EN24, CN33, NY1618, NY1624, NY1630, NY1818, NY1830, NY2430, NY2436, NY3024, NY3030, NY3036, NY3048, NYCUSTOM Awning size 3 4 5 6 7 8 9 10 11 Width in inches 40.5 52.5 64.5 76.5 88.5 100.5 112.
PAGE 2
There are a variety of building wall surfaces, Awntech does not supply the hardware to install your awning. You will need to purchase installation hardware at your local hardware store. We have advised you on different surface applications below: CONCRETE BLOCK WALLS: (1)1/2” masonry bit with a 3/8” shank, (4-5) 5/16”X3” Masonry anchor bolts, 9/16” socket. You will also need a roll of weather stripping.
PAGE 3
New Yorker should be assembled on the ground STEP 1: Separate all of the parts, so they will be easy to assemble. Step 2: Connect Front Bar (FB) to the (2) two back bars (CNB). Make sure the C-Channel is towards the back. The Velcro on the back bars should be facing outwards. Use a rubber mallet to fully seat the tubing into the fitting. Secure with self tapping screws.
PAGE 4
Step 3: Assemble the front structure. The Front Bar (FB) with Velcro, placed on the bottom. The Velcro will face you. Insert Projection supports (CPS) in to the ends. Note: 5’ to 20’ awnings extra supports are included, they are shorter then (CPS). Place them in inserts. Then place the Front bar on top and secure with Self tapping screws. Frame 2’-4’ Frame 5’-24’ Step 4: Insert the Projection Bars (CNP) in to the bottom slots, and insert the Projection assembly (CNPA) in to the top slots.
PAGE 5
Step 5: Connect the Front Bar Assembly on to the Back Bar Assembly.. Secure with Self tapping screws. Frame 2’-4’ Frame 5’-24’ Step 6: Install the Cover Supports (CNC) with arrows pointing upward. Attach both ends to the (TB) and (FB). Larger awnings have add Cover support (CNC) and Wall Support (CNPM). Secure with self tapping screws.
PAGE 6
The frame for the New Yorker is complete Frame 2’-4’ Frame 5’-24’ INSTALLING THE COVER STEP 7: Slide the tubing at the top of the fabric cover into the C-Channel on the top of (TB).
PAGE 7
STEP 8: Pull the remainder of fabric over the fame with the valance hanging down below the (NC) and (FB) bars. Frame 2’-4’ Frame 5’-24’ STEP 9: Once you are satisfied with the position of the cover, Pull the tabs snugly and attach them to the pre-installed Velcro tape on the bars.
PAGE 8
MOUNTING THE AWNING STEP 10: Place the awning on in desired location. From the inside of the awning make a mark on the wall where the awning touches.
PAGE 9
CLEANING & CARING NORMAL WEAR & TEAR: Certain regions of the country are extremely hard on awnings of any kind. If you live in these areas, (High maintenance areas: FL, TX, NM, AZ, NV or high altitude areas) you probably already know how the sun can take a toll. Normal wear and tear is not covered in our warranty and should be expected. Damages caused by improper anchoring, strong winds, snow or ice are not considered defects. We offer replacement fabric at affordable prices.
PAGE 10
FAILED TO MAKE FULL PAYMENT, THIS WARRANTY SHALL BE NULLIFIED AND AWNTECH CORPORATION SHALL BE RELIEVED FROM ANY RESPONSIBILITY OR LIABILITY UNDER THIS WARRANTY. The purchaser agrees and acknowledges that this Warranty agreement constitutes an executor contract. •The purchaser must use care in installation, maintenance, operation, use, and storage of the product in accordance with the instructions contained in the owner’s manual.
PAGE 11
FABRIC DYE-LOT AND LIGHTING VARIATION: Fabric dyes may cary slightly from run to run. This is a normal and unavoidable. Different lighting types and lighting direction may cause the fabric you choose on the website to appear slightly different than the actual fabric does in full sunlight. RETURNS/ORDER EXCEPTION CONTRACT: Phone :817-354-9600, Fax 817-354-9612, E-mail customers@awntech.