Installation Guide

ManualsBrandsAwntech ManualsAwningsRR12-4KW

The Dallas Retro

Style Awning

Important Installation Information:

The Dallas Retro Frame must be installed on the wall as there is

no connecting part between BP and TB

ASSEMBLY AND INSTALLATION INSTRUCTIONS

CAUTION: When you are opening the box keep children away. This

awning frame contains sharp metal and small hardware parts.

Choking hazard: Keep parts away from children. They may choke on

hardware. Be extremely cautious around children.

Models with Valance:

RR22, ER23, CR32, CR34, CR43, CR44, ER2442, ER12, ER1836, ER1230, ER1030, ER24,

CR33

Models without Valance:

RR22-NV, ER23-NV, CR32-NV, CR34-NV, CR43-NV, CR44-NV, ER2442-NV, ER12-NV, ER1836-

NV, ER1230-NV, ER1030-NV, ER24-NV, CR33-NV

All the awning sizes over 9’ wide come in two sections. Example: Top Bar (TB) consists of

TB1 & TB2 and Front Bar (FB) consists of FB1 & FB2

See the chart below for the width of the awning:

Awning Size

Width in inches

Awning Size

Width in inches

3 40.5 12 148.5

4 52.5 13 160.5

5 64.5 14 172.5

6 76.5 15 184.5

7 88.5 16 196.5

8 100.5 17 208.5

9 112.5 18 220.5

10 124.5 19 232.5

11 136.5 20 244.5

OUR AWNINGS ARE DESIGNED 4.5” WIDER THAN STANDARD

WINDOW/DOOR OPENINGS SO THAT YOU WILL BE ANCHORING INTO

THE STUDS AROUND THE WINDOW OR DOOR. EXAMPLE: RR22-5 is for a

5’-0” wide window. It measures 64.5” wide, 31” tall (24” plus 7” valance) and 24”

deep (projection).

Summary of content (9 pages)

PAGE 1
The Dallas Retro® Style Awning Important Installation Information: The Dallas Retro Frame must be installed on the wall as there is no connecting part between BP and TB ASSEMBLY AND INSTALLATION INSTRUCTIONS CAUTION: When you are opening the box keep children away. This awning frame contains sharp metal and small hardware parts. Choking hazard: Keep parts away from children. They may choke on hardware. Be extremely cautious around children.
PAGE 2
Due to the fact that there is such a variety of building wall surfaces, Awntech does not supply the hardware to install your awning. You will need to purchase installation hardware at your local do-ityourself center. We have advised you on different surface applications below: CONCRETE BLOCK WALLS: (1) ½” masonry bit with a 3/8” shank, (4-5) 5/16”x 3” masonry anchor bolts, 9/16” socket. You will also need a roll of weather stripping.
PAGE 3
The Dallas Retro Frame must be installed on the wall as there is no connecting part between BP and TB STEP 1: Separate all of the parts by part number so they will be easy to assemble. STEP 2: The Top Bar (TB) must be installed first. The C-Channel on the TB must be close to the wall. Before installing the TB you must make sure that there is enough space below the TB for the height of the awning.
PAGE 4
STEP 10: Once you are satisfied with the position of the cover on the frame, wrap the Velcro strips on the fabric tabs around the exterior bars. Pull the tabs snugly and attach them to the pre-installed Velcro tape on the bars. WARRANTY 5-Year Limited Manufacturer's Warranty A. WHO GIVES THIS WARRANTY? Awntech Corporation B. WHO IS ENTITLED TO THIS WARRANTY? This Warranty applies only to the original purchaser who paid for the product and may not be assigned or transferred to subsequent owners.
PAGE 5
G. RETURNS, DAMAGES RETURN QUALIFICATION: You can only return a product if it is defective upon arrival. If you simply do not like the product or if you did not measure correctly, you will only be qualified for a merchandise credit and you will be required to pay for shipping the product back to Awntech in restockable condition. If DAMAGED MATERIAL: Damage occasionally occurs during shipping.
PAGE 6
DALLAS RETRO STYLE AWNINGS MUST BE ASSEMBLED ON THE BUILDING For frames sizes 2’ – 4’
PAGE 7
PAGE 8
For frame sizes 5’- 7’.
PAGE 9