Installation Guide

ManualsBrandsAwntech ManualsAwningsSanta Fe 76.5-in Wide x 36-in Projection Brown Solid Open Slope Window/Door Fixed Awning

The Santa Fe Style Awning

Santa Fe Style Awning Frame must be installed on the wall as there is

no connecting part between SFB and TB

ASSEMBLY AND INSTALLATION INSTRUCTIONS

CAUTION: When you are opening the box keep children away. This

awning frame contains sharp metal and small hardware parts.

Choking hazard: Keep parts away from children. They may choke on

hardware. Be extremely cautious around children.

Models with Valance:

SANT22, ESANT23, SANT32, SANT34, SANT43, SANT44, ESANT2442, ESANT12,

ESANT1836, ESANT1230, ESANT1030, ESANT24, SANT33

Models with-out Valance:

SANT22-NV, ESANT23-NV, SANT32-NV, SANT34-NV, SANT43-NV, SANT44-NV, ESANT2442-

NV, ESANT12-NV, ESANT1836-NV, ESANT1230-NV, ESANT1030-NV, ESANT24-NV, SANT33-

All the awning sizes over 9’ wide come in two parts such as Top Bar (TB) consist of TB1 &

TB2 and Front Bar (FB) consist of FB1 & FB2

See the chart below for the width of the awning:

Awning Size

Width in inches

Awning Size

Width in inches

3 40.5 12 148.5

4 52.5 13 160.5

5 64.5 14 172.5

6 76.5 15 184.5

7 88.5 16 196.5

8 100.5 17 208.5

9 112.5 18 220.5

10 124.5 19 232.5

11 136.5 20 244.5

Summary of content (7 pages)

PAGE 1
The Santa Fe Style Awning Santa Fe Style Awning Frame must be installed on the wall as there is no connecting part between SFB and TB ASSEMBLY AND INSTALLATION INSTRUCTIONS CAUTION: When you are opening the box keep children away. This awning frame contains sharp metal and small hardware parts. Choking hazard: Keep parts away from children. They may choke on hardware. Be extremely cautious around children.
PAGE 2
THESE AWNINGS ARE DESIGNED 4-1/2” WIDER THAN THE OPENINGS YOU ARE COVERING. (EXAMPLE: SANT22-5 is for a 5’-0” wide window. It is built 64-1/2” wide, 31” tall including 7” valance and 36” projection (deep). Due to the wide variety of building surfaces, Awntech does not supply the hardware to install your awning on the wall. You will need to purchase installation hardware at your local do-it-yourself center. We will advise you on different surface applications.
PAGE 3
NOTE: YOU WILL FIND THAT THE FITTINGS HAVE BEEN PRE-INSTALLED, AS WE HAVE PRE-ASSEMBLED AND INSPECTED IT FOR YOU IN THE FACTORY. Santa Fe Style Awning Frame must be installed on the wall as there is no connecting part between SFB and TB STEP 1: Separate all of the parts by part number so they will be easy to assemble. STEP 2: Top Bar (TB) must be installed first. C-Channel on the TB must be close to the wall.
PAGE 4
INSTALLING THE COVER STEP 8: Slide the bead at the top of the fabric into the C-Channel at the top of (TB). STEP 9: Pull the remainder of fabric over the frame with the valance hanging down below the (NC) and (FB) bars. STEP 10: Once you are satisfied with the position of the cover on the frame, wrap the Velcro strips on the fabric tabs around the exterior bars. Pull the tabs snugly and attach them to the pre-installed Velcro tape on the bars. WARRANTY 5-Year Limited Manufacturer's Warranty A.
PAGE 5
STATUTORY, IMPLIED OR OTHERWISE AND ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATIONS, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED. 2.
PAGE 6
The Santafe Frame must be assembled on the wall. The pictures below represent a frame size from 5’ wide to 7’ wide. For the frame size 3’ and 4’ there won’t be any middle parts.
PAGE 7