User Manual

To connect in AP mode
1. Enter Wi-Fi AP Mode: Setting button + connection button
Ensure the system is disarmed before this operation, long press and hold the “ Setting
button + connection button ” until hear 3beeps, the Blue LEDs start blinks, now your
alarm is ready in AP mode for network setting.
2. Choose the device which will be add
choose “Add Manually”
→
”Others”
→
”Wi-Fi Connector” in the APP.
3. Choose ‘AP Mode’
4. Set the Wi-Fi network which will be connect
Enter Wi-Fi password of the router which the alarm will be connect to.
5. Connect the phone’s Wi-Fi to the device’s hotspot
In phone’s WLAN list, choose ‘SmartLife_xxxx’ and connect. After connected, return
back to the APP, waiting for about 20 seconds to get a response.
6. Now you can set the alarm name to complete the connection
Choose AP Mode AP Mode