Operating instructions

3-2

To change a setting:

Action Key Duration Display

Enter basic programming SET P/R Will show day of week

Move to desired display UP and DOWN P/R Will increment through

arrows the displays

Enable setting to be changed SET P/R Display will ﬂ ash

Change setting UP and DOWN P/R Value changes and

arrows continues to ﬂ ash

Save setting SET P/R Display stops ﬂ ashing

Return to operation REGEN P/R Normal operation display

This level of programming is accessible by pressing the SET button.

The UP and DOWN arrows will step through the settings.

Time of day

Day of week

Time of regeneration

Number of days between regeneration (99 day calendar override timer)

Amount of salt used per regeneration

System capacity

Hardness

To make changes:

• Time of day

When the Time of Day is displayed, push SET. The time will ﬂ ash. Use the arrow buttons to increase/decrease

the time. Push SET to enter the selection.

• Days of the week

The day of the week does not have a default setting. It is entered at Power-up. To change the current day, push

SET when day of week is displayed. A ﬂ ag will ﬂ ash beneath the current day. Use the arrow buttons to change.

Push SET to enter the selection.

• Time of Regeneration

This is set for 2:00 AM as the default. The controller does not account for daylight savings time.

To change this setting, push SET. Use the arrow buttons to increase/decrease the time. Push SET to enter the

selection.