Instruction manual

6
PN-Series Manual
2. INSTALLATION
2.1. Part List
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
Weighing Pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
Draft Shield (Model PN-210C only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
Calibration Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0-2pcs
(depending on model)
AC Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
RS232 Cable ( DB9M to DIN5M ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
Instruction Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
Warranty Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
2.2. Unpacking
Carefully unpack the balance and remove it from its styrofoam supports. You may want to keep the original
box and packing materials for storing the balance when not in use.
If the balance is damaged contact the supplier immediately. Keep all packing materials as they were when
you received them.
2.3. Setting Up the Balance
Place the balance on a level surface, free of vibration.
For the PN-C Series, there is a red security screw that
must be loosened before rst use. Remove any tape
used to hold the glass doors secure in shipping and
carefully set the scale platform into place (See Fig.
2.3a and 2.3b). You may want to keep the original
box and packing materials for storing the balance
when not in use.
If the balance is damaged contact the supplier
immediately. Keep all packing materials as they were
when you received them.
Security Screw
(PN-C only)
Platform
Mount
Draft Ring
(PN-C only)
Weighing
Platform
Weighing
Platform
Fig. 2.3b (PN-B, PN-C)
Fig. 2.3a (PN-A)